LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Turbo, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4DOTC) >> Compulsory Valve Operation Check Mode >> Operation

Compulsory Valve Operation Check Mode: Operation

  1. Prepare the Subaru Select Monitor kit. < Ref. to , PREPARATION TOOL, General Description . >
    Fig 1: Identifying Subaru Select Monitor Kit
    G03749855Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the diagnosis cable to Subaru Select Monitor.
  3. Insert the cartridge into Subaru Select Monitor. < Ref. to , PREPARATION TOOL, General Description . >
    Fig 2: Inserting Cartridge Into Subaru Select Monitor
    G03749856Courtesy of SUBARU OF AMERICA, INC.
  4. Connect the test mode connector (A) at the lower portion of instrument panel (on the driver's side).
    Fig 3: Locating Test Mode Connector
    G03749857Courtesy of SUBARU OF AMERICA, INC.
  5. Connect the Subaru Select Monitor to data link connector located in the lower portion of instrument panel (on the driver's side).
    Fig 4: Locating Data Link Connector
    G03749858Courtesy of SUBARU OF AMERICA, INC.
    CAUTION: Do not connect scan tools except for the Subaru Select Monitor and OBD-II general scan tool.
  6. Turn the ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.
    Fig 5: Locating Power Switch
    G03749859Courtesy of SUBARU OF AMERICA, INC.
  7. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  8. On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
  9. Press the [YES] key after the information of engine type is displayed.
  10. On the << Engine Diagnosis >> display screen, select the {System Operation Check Mode} and press the [YES] key.
  11. On the << System Operation Check Mode >> display screen, select the {Actuator ON/OFF Operation} and press the [YES] key.
  12. Select the desired compulsory actuator on the << Actuator ON/OFF Operation >> display screen and press the [YES] key.
  13. Pressing the [NO] key completes the compulsory operation check mode. The display will then return to the << Actuator ON/OFF Operation >> screen.
    • A list of support data is shown in the following table.
      SUPPORT DATA LIST

      Contents Display
      Compulsory fuel pump relay operation check Fuel Pump Relay
      Compulsory radiator fan relay operation check Radiator Fan Relay
      Compulsory air conditioning relay operation check A/C Compressor Relay
      Compulsory purge control solenoid valve operation check CPC Solenoid Valve
      Compulsory pressure control solenoid valve operation check PCV Solenoid Valve
      Compulsory drain valve operation check Vent. Control Solenoid Valve
      Compulsory fuel tank sensor control valve operation check Fuel Tank Sensor Control Valve
    NOTE:
    • The following parts will be displayed but not functional because they are not installed on the vehicle.
      PART DISPLAY

      Display
      EGR Solenoid Valve
      ASV Solenoid Valve
      FICD Solenoid
      Pressure Switching Sol. 1
      Pressure Switching Sol. 2
      AAI Solenoid Valve
      Turbocharger Wastegate Solenoid
    • For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION  MANUAL.
scientia non olet · About LEMON Manuals