LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission) >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install snap ring to reduction driven gear.
  2. Using a press, install a new ball bearing to reduction driven gear.
    Fig 1: Installing Ball Bearing To Reduction Driven Gear
    G03750591Courtesy of SUBARU OF AMERICA, INC.
  3. Install snap ring to reduction driven gear.
    Fig 2: Installing Snap Ring To Reduction Driven Gear
    G03750592Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals