LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission) >> Dropping Resistor >> Removal

Dropping Resistor: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Dropping resistor is installed only for NON-TURBO model.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G03750515Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake duct.

    < Ref. to REMOVAL , Air Cleaner Case. >

  3. Disconnect the connector from dropping resistor.
  4. Remove the dropping resistor.
    Fig 2: Removing Dropping Resistor
    G03750516Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals