LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Security And Locks) >> Keyless Entry Control Unit >> Removal

Keyless Entry Control Unit: Removal

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the glove box. < Ref. to REMOVAL , Glove Box. >
  3. Remove the screw, then remove the keyless entry control module while disconnecting the connector.
Fig 1: Removing Screw
G03833910Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals