LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Lighting System) >> Side Turn Signal Light Assembly >> Inspection

Side Turn Signal Light Assembly: Inspection

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the side turn signal light assembly and check that it blinks normally.
  2. If it does not blink normally, replace the side turn signal light assembly with a new one.
NOTE: Since LED (Light Emitting Diode) is used for side turn signal light, replace the side turn signal light assembly when the LED is powered off.
scientia non olet · About LEMON Manuals