Section 65 (Lighting System): General Description: Caution

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Before removing or installing parts, always disconnect the battery ground cable from battery. When replacing the audio, control module and other parts provided with memory functions, record the memory contents before disconnecting the battery ground cable. Otherwise, the memory will be erased.
Reassemble the parts in the reverse order of disassembly procedure unless otherwise indicated.
Adjust parts to the given specifications.
Connect the connectors securely during reassembly.
After reassembly, make sure functional parts operate smoothly.

WARNING:

The air bag system wiring harness is routed near electrical parts and switches. All air bag system wiring harnesses and connectors are yellow. Do not use the electrical test equipment on these circuits.
Be careful not to damage the air bag system wiring harness when servicing electrical parts and switches.