LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T & M/T Control Systems >> A/T Shift Lock Solenoid and "P" Position Switch >> Inspection

A/T Shift Lock Solenoid and "P" Position Switch: Inspection

DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CHECK SHIFT LOCK SOLENOID. 
Measure the resistance of shift lock solenoid connector terminals.
Terminal 
No. 4 - No. 5 		 Is the measured value within 20 - 40 Ω? Go to step 2.  Replace the shift lock solenoid and "P" position switch assembly.
2 CHECK SHIFT LOCK SOLENOID. 
Connect the battery with shift lock solenoid connector terminal, operate solenoid.
Terminal 
No. 4 (+) - No. 5 (-) 		 Is the shift lock solenoid operating properly? Go to step 3.  Replace the shift lock solenoid and "P" position switch assembly.
3 CHECK "P" POSITION SWITCH. 
  1. Move the select lever to "P" position.
  2. Measure resistance between "P" position switch connector terminals.
 Is the measured value less than 1 Ω? Go to step 4.  Replace the "P" position switch.
4 CHECK "P" POSITION SWITCH. 
  1. Move the select lever to other than "P" position.
  2. Measure resistance between "P" position switch connector terminals.
 Is the measured value more than 1 MΩ? Normal Replace the "P" position switch.
scientia non olet · About LEMON Manuals