LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Diagnostics (H4SO) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Transmission Control System} and press the [YES] key.
  3. Press the [YES] key after the information of transmission type is displayed.
  4. On the << Transmission Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.
  5. When the "Done" and "Turn Ignition Switch OFF" are shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.
    NOTE: For detailed operation procedure, refer to the Subaru Select Monitor operation manual.
scientia non olet · About LEMON Manuals