Combination Meter: Removal
WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the ground cable from battery.
- Set the tilt steering at the lowest position.
- Remove the instrument panel under cover and lower cover of driver's seat side. < Ref. to REMOVAL , Instrument Panel Assembly. >
- Remove the screws of combination meter (one for upper side, two for lower side) and pull tilting the meter toward you.
- Disconnect the connector in the rear side of combination meter to remove meter.
CAUTION:
- Be careful not to damage the meter or instrument panel.
- Pay particular attention to avoid damaging the meter glass.