LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Instrumentation/Driver Info) >> Clock System >> Inspection >> Check Illumination Circuit

Check Illumination Circuit

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
ILLUMINATION CIRCUIT SPECIFICATION

Step Check Yes No
1. CHECK ILLUMINATION CIRCUIT POWER SUPPLY. 
  1. Turn the ignition switch to OFF.
  2. Disconnect the clock harness connector.
  3. Turn the ignition switch and lighting switch to ON.
  4. Measure the voltage between clock harness connector and chassis ground.

    Connector & terminal 

    (i59) No. 1 (+) - Chassis ground (-): 

 Is the voltage more than 10 V? Replace the clock body. Check the harness for open or short between fuse and clock.
scientia non olet · About LEMON Manuals