LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Instrumentation/Driver Info) >> Clock System >> Inspection >> Check Bright Circuit

Check Bright Circuit

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
BRIGHT CIRCUIT SPECIFICATION

Step Check Yes No
1. CHECK BRIGHT CIRCUIT POWER SUPPLY. 
  1. Turn the ignition switch to OFF.
  2. Disconnect the clock harness connector.
  3. Turn the ignition switch to ON.
  4. Measure the voltage between clock harness connector and chassis ground.

    Connector & terminal 

    (i59) No. 2 (+) - Chassis ground (-): 

 Is the voltage more than 10 V? Replace the clock body. Go to step 2. 
2. CHECK HARNESS BETWEEN CLOCK AND BODY INTEGRATED UNIT. 
  1. Turn the ignition switch to OFF.
  2. Disconnect harness connector of body integrated unit.
  3. Measure the resistance between clock harness connector and body integrated unit harness connector.

    Connector & terminal 

    (i59) No. 2 - (i84) No. 30: 

 Is the resistance less than 10 ohm? Replace the body integrated unit. Repair the wiring harness.
scientia non olet · About LEMON Manuals