Inspection
WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Place the front wheel on turning radius gauge. Make sure the ground contacting surfaces of front and rear wheels are set at the same height.
- Set the ST into the center of wheel, and then set the wheel alignment gauge.
ST 927380002 ADAPTER
- Measure the caster angle in accordance with the operation manual for wheel alignment gauge.
CASTER SPECIFICATION
| Model | Caster | |
|---|---|---|
| Sedan | 2.5 i, 2.5 GT | 5°55' |
| OUTBACK | 4°55' | |
| Wagon | 2.5 i, 2.5 i. LTD, 2.5 GT |
5°40' |
| OUTBACK | 4°55' | |