LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Clutch System) >> Master Cylinder >> Disassembly

Master Cylinder: Disassembly

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the straight pin and reservoir tank.
    Fig 1: Removing Straight Pin And Reservoir Tank
    G03832226Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the oil seal.
    Fig 2: Removing Oil Seal
    G03832227Courtesy of SUBARU OF AMERICA, INC.
  3. Pull the cylinder boot backward.
    Fig 3: Pulling Cylinder Boot Backward
    G03832228Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the snap ring.
    CAUTION: Be careful to prevent the rod, washer, piston and return spring from flying out when removing the snap ring.
  5. Remove the clutch damper.
scientia non olet · About LEMON Manuals