Master Cylinder: Assembly

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the clutch damper.
Tightening torque:

46.6 N.m (4.75 kgf-m, 34.4 ft-lb)
Apply a coat of grease to the contacting surfaces of the push rod and piston before installation.
Grease:

SILICONE GREASE G40M (Part No. 004404003)

Fig 1: Applying A Coat Of Grease To Contacting Surfaces
Courtesy of SUBARU OF AMERICA, INC.
Assemble in the reverse order of disassembly.

Tightening torque:

10 N.m (1.0 kgf-m, 7 ft-lb)