Section 45 (Clutch System): Flywheel: Removal

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The illustration shown in Fig 1 is for Turbo model. However, perform the same procedure for Non-turbo model.

Remove the transmission assembly. < Ref. to REMOVAL , Manual Transmission Assembly. >
Remove the clutch cover and clutch disc. < Ref. to , REMOVAL , Clutch Disc and Cover. >
Using the ST1 and ST2, remove the flywheel. ST1 498497100 CRANKSHAFT STOPPER ST2 499057000 TORX® PLUS

Fig 1: Removing Clutch Cover And Clutch Disc Using Special Tool
Courtesy of SUBARU OF AMERICA, INC.