LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (A/T & M/T Control Systems) >> Select Lever >> Disassembly

Select Lever: Disassembly

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Shift the select lever to "N" range.
  2. Remove the indicator light.
    Fig 1: Removing Indicator Light
    G03831037Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the grip.
  4. Remove the indicator assembly.
    Fig 2: Removing Indicator Assembly
    G03831038Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the blind.
    Fig 3: Removing Blind
    G03831039Courtesy of SUBARU OF AMERICA, INC.
  6. Shift the select lever to "N" range, and then remove the detent spring.
    Fig 4: Removing Detent Spring
    G03831040Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the bolt, and separate the guide plate upper from plate lower.
    Fig 5: Removing Bolt, And Separate Guide Plate Upper From Plate Lower
    G03831041Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the connector from guide plate upper.
    Fig 6: Removing Connector From Guide Plate Upper
    G03831042Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the sheet, and remove the shift lock solenoid assembly.
    Fig 7: Removing Shift Lock Solenoid Assembly
    G03831043Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the switch assembly.
    Fig 8: Removing Switch Assembly
    G03831044Courtesy of SUBARU OF AMERICA, INC.
  11. Remove the check plate.
    Fig 9: Removing Check Plate
    G03831045Courtesy of SUBARU OF AMERICA, INC.
  12. Raise the claw of connector.
    Fig 10: Locating Claw Connector
    G03831046Courtesy of SUBARU OF AMERICA, INC.
  13. Disconnect the terminals of SPORT mode switch and shift lock solenoid assembly from connector, using a flat-tip screwdriver with thin tip.
    Fig 11: Disconnecting Terminals Using Flat-Tip Screwdriver
    G03831047Courtesy of SUBARU OF AMERICA, INC.
  14. Remove the cable bracket.
    Fig 12: Removing Cable Bracket
    G03831048Courtesy of SUBARU OF AMERICA, INC.
  15. Remove the cover.
    Fig 13: Removing Cover
    G03831049Courtesy of SUBARU OF AMERICA, INC.
  16. Remove the select lever assembly.
    Fig 14: Removing Select Lever Assembly
    G03831050Courtesy of SUBARU OF AMERICA, INC.
  17. Remove the clamp, and remove the arm assembly and bushing plate.
    Fig 15: Removing Arm Assembly And Bushing Plate
    G03831051Courtesy of SUBARU OF AMERICA, INC.