Select Lever: Assembly

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Clean all the parts before assembly.
Apply grease [Multemp AC-D or equivalent] to each parts. < Ref. to , AT SELECT LEVER , COMPONENT, General Description. >
Assemble in the reverse order of disassembly.
NOTE:
- For each tightening torque refer to AT SELECT LEVER , COMPONENT, General Description.
- Connect the switch terminal to connector.
Fig 1: Connecting Switch Terminal
Courtesy of SUBARU OF AMERICA, INC.
After completion of installation, shift the select lever from "P" range to "D" range, then check whether the indicator and select lever matches, whether the pointer and position mark matches and what the operating force is.