Shift Lock Operation
WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
SHIFT LOCK OPERATION INSPECTION
| Step | Check | Yes | No |
|---|---|---|---|
1. CHECK SHIFT LOCK.
|
While brake pedal is not depressed, can select lever move from "P" range to other ranges? | Inspect "SELECT LEVER CANNOT BE SHIFT LOCKED". < Ref. to , SELECT LEVER CANNOT BE SHIFT , INSPECTION, AT Shift Lock Control System. > | Go to step 2 . |
| 2. CHECK SHIFT LOCK. | While brake pedal is depressed, can select lever move from "P" range to other ranges? | Go to step 3. | Inspect "SELECT LEVER SHIFT LOCK CANNOT BE RELEASED". < Ref. to , SHIFT LOCK OF SELECT LEVER CANNOT BE RELEASED , INSPECTION, AT Shift Lock Control System. > |
| 3. CHECK KEY INTER LOCK. | Is the ignition switch turned to the "LOCK" position when the select lever is set to other than "P" range? | Inspect "KEY INTER LOCK DOES NOT BE LOCKED OR RELEASED". < Ref. to , SHIFT LOCK OF SELECT LEVER CANNOT BE RELEASED , INSPECTION, AT Shift Lock Control System. > | Go to step 4. |
| 4. CHECK KEY INTER LOCK. | Is the ignition switch turned to the "LOCK" position when the select lever is set to "P" range? | AT shift lock system is normal. | Inspect "KEY INTER LOCK DOES NOT BE LOCKED OR RELEASED". < Ref. to , SHIFT LOCK OF SELECT LEVER CANNOT BE RELEASED , INSPECTION, AT Shift Lock Control System. > |