LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Outback L.L. Bean Edition >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Removal & Installation >> Rear Sub-Frame >> Installation

Rear Sub-Frame: Installation

  1. Install in reverse order of removal.
  2. For installation and tighten rear differential.
    1. With T-type, see REMOVAL, Rear Differential for T-type .
    2. With VA-type, see REMOVAL, Rear Differential for VA-type .
    NOTE: Check wheel alignment and adjust if necessary.
  3. Using transmission jack, support rear arm horizontally and tighten nuts and bolts securing rear arm, link front, link rear, link upper and shock absorber. See Figure.
scientia non olet · About LEMON Manuals