Transfer Case and Extension Case Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.

TRANSFER CASE
1. Remove the reverse check assembly. Refer to REVERSE CHECK SLEEVE .
2. Remove the oil guide.
  
  Fig 1: Removing Oil Guide
  Courtesy of SUBARU OF AMERICA, INC.
EXTENSION CASE
1. Remove the transfer drive gear assembly. Refer to TRANSFER DRIVE GEAR .
2. Remove the shift bracket.
  
  Fig 2: Removing Shift Bracket
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the oil seal from extension case. Refer to OIL SEAL .