LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Outback L.L. Bean Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Manual Transmission And Differential) >> Reverse Check Sleeve >> Installation

Reverse Check Sleeve: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the reverse check sleeve.
    1. Tightening torque: 6.4 N.m (0.65 kgf-m, 4.7 ft-lb) 
    Fig 1: Installing Reverse Check Sleeve
    G00916445Courtesy of SUBARU OF AMERICA, INC.
  2. Install the ball, spring, washer and plug to transfer case.
    1. Tightening torque: 9.75 N.m (1.0 kgf-m, 7.2 ft-lb) 
    Fig 2: Installing Ball, Spring, Washer & Plug To Transfer Case
    G00916446Courtesy of SUBARU OF AMERICA, INC.
  3. Install the shifter arm to transfer case assembly.
  4. Install the transfer case with extension case assembly. Refer to INSTALLATION  , Transfer Case and Extension Case Assembly.
  5. Install the manual transmission assembly to vehicle. Refer to INSTALLATION  , Manual Transmission Assembly.
scientia non olet · About LEMON Manuals