LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Outback Base, 4D Sedan >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Rear Drive Shaft >> Installation

Rear Drive Shaft: Installation

  1. Select the appropriate shim. .
  2. Install drive plate and driven plate.
  3. Insert rear driveshaft into the center differential assembly.
  4. Join transmission case and extension case. Install rear wheel speed sensor. Refer to INSTALLATION .
  5. Install transmission assembly. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals