LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Outback Base, 4D Sedan >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Rear Drive Shaft >> Disassembly

Rear Drive Shaft: Disassembly

  1. Using a press, remove revolution gear.
    Fig 1: Removing Revolution Gear Using Special Tool
    G00924122Courtesy of SUBARU OF AMERICA, INC.
  2. Using a press, remove the front and rear side ball bearings and clutch hub.
    Fig 2: Removing Front & Rear Side Ball Bearings & Clutch Hub Using Special Tool
    G00924123Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals