LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Outback Base, 4D Sedan >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Rear Drive Shaft >> Assembly

Rear Drive Shaft: Assembly

Assemble in the reverse order of disassembly.

NOTE:
  • Use a new revolution gear and ball bearings.
  • Make sure the clutch hub is oriented in the correct direction.
    Fig 1: Identifying Revolution Gear & Ball Bearings Dimension
    G00924124Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals