LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Outback Base, 4D Sedan >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Induction Valve Control Solenoid >> Removal

Induction Valve Control Solenoid: Removal

  1. Disconnect ground cable from battery.
  2. Remove intake manifold.

    Refer to INTAKE MANIFOLD .

  3. Disconnect hose which connectors induction valve to induction valve control solenoid.
  4. Disconnect connector from induction valve control solenoid.
  5. Remove induction valve control solenoid from intake manifold.
    Fig 1: Removing Induction Valve Control Solenoid
    G00897249Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals