LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Outback Base, 4D Sedan >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Switch Back Gate >> Installation

Switch Back Gate: Installation

Install in the reverse order of removal.

NOTE: Mount weatherstrip by aligning silver line mark with back panel tray center bolt.
Fig 1: Mounting Weatherstrip By Aligning Silver Line Mark With Back Panel Tray Center Bolt
G03510576Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 

27.5 N.m (2.80 kgf-m, 20.3 ft-lb)