Section 20 (Clutch System): Flywheel: Installation

WARNING: This page is about a different variant/trim than selected.

Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER

Fig 1: Locking Flywheel For Installing Using ST
Courtesy of SUBARU OF AMERICA, INC.
Tighten the flywheel attaching bolts to the specified torque.
NOTE: Tighten the flywheel installing bolts gradually. Each bolt should be tightened to the specified torque in a crisscross fashion.

Tightening torque:

Except STI model

72 N.m (7.3 kgf-m, 52.8 ft-lb)

STI model

75 N.m (7.6 kgf-m, 55.3 ft-lb)

Fig 2: Tightening Sequence Of Flywheel Attaching Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the clutch disc and cover. < Ref. to INSTALLATION , Clutch disc and Cover.>
Install the transmission assembly.
5MT:

< Ref. to INSTALLATION , Manual Transmission Assembly. >

6MT:

< Ref. to INSTALLATION , Manual Transmission Assembly. >