Remote Control Mirror Switch: Inspection
Move the rearview mirror switch to each position and check continuity between terminals.
Change over switch right position:
RIGHT MIRROR SWITCH POSITION CHART
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | More than 1M ohm |
| UP | 8 and 3, 6 and 7 | Less than 1 ohm |
| DOWN | 8 and 6, 3 and 7 | Less than 1 ohm |
| LEFT | 8 and 2, 6 and 7 | Less than 1 ohm |
| RIGHT | 8 and 6, 2 and 7 | Less than 1 ohm |
Change over switch left position:
LEFT SWITCH POSITION CHART
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | More than 1M ohm |
| UP | 8 and 4, 6 and 7 | Less than 1 ohm |
| DOWN | 8 and 6, 4 and 7 | Less than 1 ohm |
| LEFT | 8 and 5, 6 and 7 | Less than 1 ohm |
| RIGHT | 8 and 6, 5 and 7 | Less than 1 ohm |
If NG, replace the switch.