Outer Mirror: Replacement
- Remove the door mirror assembly. < Ref. to REMOVAL . >
- Warm the area around the mirror holder (1) with a hair drier until the edges of the mirror holder become soft (about 2 or 3 minutes with a 1,000 W driver.)
- Use a flat tip screwdriver without sharp edges to lift the mirror out of the mirror holder. (Also disconnect the mirror heater connector from the back of mirror.)
- When installing the mirror, warm the area around the mirror holder with a hair drier until the edges of the mirror holder become soft again (about 2 or 3 minutes with a 1,000 W drier.)
- Remove the backing of the new double-stick tape, and push the mirror in to install it.NOTE: Unless the mirror holder is warmed sufficiently, the mirror holder edges may be damaged or the mirror cracked.