LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Forester XT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Air Bag Restraint Systems) >> Diagnostic Tests >> Code 23

Code 23

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before proceeding, see AIR BAG SAFETY PRECAUTIONS . After repairs are complete, check AIR BAG warning light to verify system is functioning correctly. See SYSTEM OPERATION CHECK .
  1. Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Disconnect and examine air bag control module connectors AB3, AB7 and AB8. See AIR BAG CONTROL MODULE  under REMOVAL & INSTALLATION. If poor contact in connectors exists, replace wire harnesses as necessary and go to next step. If poor contact in connectors are okay, replace air bag control module and go to next step.
  2. Reconnect system components and activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Clear air bag system codes. See CLEARING DIAGNOSTIC CODES  under DIAGNOSTICS. Perform SYSTEM OPERATION CHECK .
scientia non olet · About LEMON Manuals