Wheel Alignment: Inspection: Notes
WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Check the following items before taking wheel alignment measurement.
Check items before taking wheel alignment measurement:
- tire air pressure
- unbalanced right and left tire wear, size difference
- tire run-out
- ball joint excessive play, wear
- tie rod end excessive play, wear
- wheel bearing excessive play
- right and left wheel base imbalance
- steering link part deformed, excessive play
- suspension part deformed, excessive play
Check, adjust and measure the wheel alignment in accordance with procedures indicated in the figure:
WHEEL ALIGNMENT PROCEDURE CHART SEQUENCE1. Wheel arch height (Front and Rear)
Ref. to WHEEL ARCH HEIGHT , Inspection, Wheel Alignment.2. Camber (Front and Rear)
Ref. to CAMBER , Inspection, Wheel Alignment.3. Caster (Front)
Ref. to CASTER , Inspection, Wheel Alignment.4. Steering Angle
Ref. to STEERING ANGLE , Inspection, Wheel Alignment.5. Front Wheel Toe-In
Ref. to FRONT WHEEL TOE-IN , Inspection, Wheel Alignment.6. Rear Wheel Toe-In
Ref. to REAR WHEEL TOE-IN , Inspection, Wheel Alignment.7. Thrust Angle
Ref. to THRUST ANGLE , Inspection, Wheel Alignment.