LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Forester XT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Front Suspension) >> Front Transverse Link >> Assembly >> Rear Bushing

Rear Bushing

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear bushing to transverse link and align aligning marks scribed on the two.
  2. Tighten a new self-locking nut.
    NOTE: While holding the rear bushing so as not to change position of aligning marks, tighten the self-locking nut.

    Tightening torque: 

    190 N.m (19.4 kgf-m, 140 ft-lb) 

scientia non olet · About LEMON Manuals