Select Lever: Disassembly

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the packing.
Remove the grip.
Remove the indicator light, and then remove the indicator cover.
NOTE: Be careful not to break the indicator light during removal.

Fig 1: Removing Indicator Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the blind.
Remove the cover.

Fig 2: Removing Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the clips, and then remove the guide plate.

Fig 3: Removing Guide Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the clamp, and the remove the shift lock solenoid.

Fig 4: Removing Shift Lock Solenoid
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt.

Fig 5: Removing Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the lock plate A, B, C and bushing.

Fig 6: Removing Lock Plate A, B, C And Bushing
Courtesy of SUBARU OF AMERICA, INC.
Remove the cushion plate.

Fig 7: Removing Cushion Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the clip, and then remove the "P" range switch.

Fig 8: Removing Range Switch
Courtesy of SUBARU OF AMERICA, INC.
Remove the grommet, and then extract spring pin.

Fig 9: Removing Grommet And Extract Spring Pin
Courtesy of SUBARU OF AMERICA, INC.
Remove the select lever arm, and then take away the select lever COMPL from plate.

Fig 10: Removing Select Lever Arm And Select Lever COMPL From Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the detent spring, and then remove the detent arm.

Fig 11: Removing Detent Arm
Courtesy of SUBARU OF AMERICA, INC.
Remove the select lever COMPL bushing from bracket.

Fig 12: Removing Select Lever COMPL Bushing From Bracket
Courtesy of SUBARU OF AMERICA, INC.
Remove the bracket from select lever COMPL.

Fig 13: Removing Bracket From Select Lever COMPL
Courtesy of SUBARU OF AMERICA, INC.
Remove the bushing from bracket.

Fig 14: Removing Bushing From Bracket
Courtesy of SUBARU OF AMERICA, INC.