LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Forester XT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (Normal Mode)

SUBARU Select Monitor (Normal Mode)

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. On << Main Menu >> display screen, select the (2. Each System Check} and press the [YES] key.
  2. On << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type is displayed.
  4. On << Engine Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.
  5. When the 'Done' and Turn Ignition Switch OFF' are shown on display screen, turn the ignition switch to OFF, and then turn the Subaru Select Monitor to OFF.
    NOTE: For detailed operation procedure, refer to SUBARU SELECT MONITOR OPERATION MANUAL.
scientia non olet · About LEMON Manuals