Read Diagnostic Trouble Code (DTC): Operation

SUBARU SELECT MONITOR (NORMAL MODE)
1. On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
2. On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
3. Press the [YES] key after the information of engine type is displayed.
4. On the << Engine Diagnosis >> display screen, select the {DTC Display} and press the [YES] key.
5. On the << DTC Display >> display screen, select the {Current DTC} or {History DTC} and press the [YES] key.
NOTE:
- For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL. .
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Code (DTC). < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
SUBARU SELECT MONITOR (OBD MODE)
1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
2. On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
3. Press the [YES] key after the information of engine type is displayed.
4. On the << Engine Diagnosis >> display screen, select the {OBD System} and press the [YES] key.
5. On the << OBD Menu >> display screen, select the {DTC Display} and press the [YES] key.
6. Make sure that a DTC is shown on the display screen.
NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL. .
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Code (DTC). < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
OBD-II GENERAL SCAN TOOL
Refers to data denoting emission-related powertrain DTC.

For details concerning DTC, refer to the List of Diagnostic Trouble Code (DTC). < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >

NOTE: Refer to OBD-II general scan tool manufacturer's instruction manual to access emission-related powertrain DTC (MODE $03).