LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Forester XS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Manual Transmission And Differential) >> Front Differential Assembly >> Disassembly >> Side Retainer

Side Retainer

WARNING: This page is about a different variant/trim than selected.
NOTE: Replace the oil seal and O-ring after adjustment of drive pinion gear backlash and tooth contact.
  1. Remove the O-ring.
    Fig 1: Identifying O-Ring
    G00937378Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the oil seal.
NOTE:
  • Remove the oil seal using a flat tip screwdriver
  • Do not reuse the oil seal. Prepare a new oil seal.
Fig 2: Identifying Oil Seal
G00937379Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals