Section 139 (Starting System & Charging System (H4SO)): Battery: Installation

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

Tightening torque:

3.4 N.m (0.35 kgf-m, 2.5 ft-lb)

NOTE:

Clean the battery cable terminals, and then apply grease to retard formation of corrosion.
Connect the positive (+) cable of battery and then the ground (-) cable of battery.