LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transmission) >> Rear Vehicle Speed Sensor >> Installation

Rear Vehicle Speed Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. NON-TURBO MODEL 

    When installing the rear vehicle speed sensor, refer to INSTALLATION , Front Vehicle Speed Sensor.

  2. TURBO MODEL 

    Install in the reverse order of removal.

    NOTE: Replace O-ring with a new one.
    1. Tightening torque: 7 N.m (0.7 kgf.m, 5.1 ft.lb) 
scientia non olet · About LEMON Manuals