LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (A/T Servicing) >> Removal & Installation >> Select Cable >> Installation

Select Cable: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install select cable to plate assembly.
  2. Install select cable to range select lever.
  3. Install plate assembly to transmission. See Figure .
  4. Install snap pin to range select lever. See Figure .
  5. Move the select lever to the "N" position, then adjust the select cable position. See SELECT CABLE  under ADJUSTMENTS.
  6. Install heat shield cover. See Figure .
scientia non olet · About LEMON Manuals