LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (A/T Servicing) >> Lubrication >> Checking Fluid Level >> Checking Fluid Level When Warm

Checking Fluid Level When Warm

WARNING: This page is about a different variant/trim than selected.

Warm engine to normal operating temperature. Park vehicle on level surface, and set parking brake. Engage transaxle in all gear positions. Set transaxle selector lever in "P" position with engine idling. Remove dipstick and clean with cloth. See Figure . Check fluid level. Fluid level should be between upper "B" and lower "C" marks on dipstick in HOT range. Add fluid if necessary. DO NOT overfill.

scientia non olet · About LEMON Manuals