Ignition Coil and Ignitor Assembly: Inspection

Using tester, inspect the following items, and replace if defective.

Secondary coil resistance

CAUTION:

If the resistance is extremely low, there is a short circuit.
Ignitor is built-in the coil. Therefore, the resistance of the primary coil cannot be measured.

Specified resistance: [Secondary side]
1. Between (A) and (B) 12.8 kΩ+/-15%
2. Between (C) and (D) 12.8 kΩ+/-15%
Fig 1: Inspecting Secondary Coil Resistance Using Tester
Courtesy of SUBARU OF AMERICA, INC.