LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Baja Base, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Entry System >> Inspection >> Check Horn Operation

Check Horn Operation

CHECKING STEPS REFERENCE

Step Check Yes No
1 CHECK HORN OPERATION. 
Make sure the horn sounds when the horn switch is pushed.		 Does the horn sound? Go to step 2. Check the horn circuit.
2 CHECK HORN OPERATION. 
  1. Disconnect the keyless entry control module harness connector.
  2. Ground the harness connector terminal with a suitable wire.

    Connector & terminal 

    1. (B176) No. 13 - Chassis ground: 
 Does the horn sound? Replace the keyless entry control module. Check the harness for open circuits and/or shorts between the keyless entry control module and horn relay.
scientia non olet · About LEMON Manuals