Shifter Fork And Rod
WARNING: This page is about a different variant/trim than selected.
Select suitable shifter forks so that both coupling sleeve and reverse driven gear are positioned in the center of their synchromesh mechanisms. Rod end clearance
- A: 1st-2nd - 3rd-4th
- 0.4 - 1.4 mm (0.016 - 0.055 in)
- B: 3rd-4th - 5th
- 0.5 - 1.3 mm (0.020 - 0.051 in)
1ST-2ND SHIFTER FORK SPECIFICATIONS CHART
| 1st-2nd shifter fork | ||
|---|---|---|
| Part No. | Mark | Remarks |
| 32804AA060 | 1 | Approach to 1st gear by 0.2 mm (0.008 in) |
| 32804AA070 | No mark | Standard |
| 32804AA080 | 3 | Approach to 2nd gear by 0.2 mm (0.008 in) |
3RD-4TH SHIFTER FORK SPECIFICATIONS CHART
| 3rd-4th shifter fork | ||
|---|---|---|
| Part No. | Mark | Remarks |
| 32810AA061 | 1 | Approach to 4th gear by 0.2 mm (0.008 in) |
| 32810AA071 | No mark | Standard |
| 32810AA101 | 3 | Approach to 3rd gear by 0.2 mm (0.008 in) |
5TH SHIFTER FORK SPECIFICATIONS CHART
| 5th shifter fork | ||
|---|---|---|
| Part No. | Mark | Remarks |
| 32812AA201 | 7 | Approach to 5th gear by 0.2 mm (0.008 in) |
| 32812AA211 | No mark | Standard |
| 32812AA221 | 9 | Become distant from 5th gear by 0.2 mm (0.008 in) |