LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Outback L.L. Bean Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Engine Cooling System (H4SO)) >> General Description >> Caution

Section 70 (Engine Cooling System (H4SO)): General Description: Caution

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Wear working clothing, including a cap, protective goggles, and protective shoes during operation.
  2. Remove contamination including dirt and corrosion before removal, installation or disassembly.
  3. Keep the disassembled parts in order and protect them from dust or dirt.
  4. Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly, and replacement.
  5. Be careful not to burn your hands, because each part in the vehicle is hot after running.
  6. Be sure to tighten fasteners including bolts and nuts to the specified torque.
  7. Place shop jacks or safety stands at the specified points.
  8. Before disconnecting electrical connectors of sensors or units, be sure to disconnect ground cable from battery.