LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Outback Base, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection (Fuel Systems, H6DO)) >> Throttle Position Sensor >> Removal

Throttle Position Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02877126Courtesy of SUBARU OF AMERICA, INC.

    Remove air intake chamber. < Ref. to REMOVAL , Air Intake Chambers.>

  2. Disconnect connector from throttle position sensor.
  3. Remove throttle position sensor holding screws, and remove throttle position sensor itself.
    Fig 2: Removing Throttle Position Sensor
    G02877127Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals