LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Outback Base, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection (Fuel Systems, H6DO)) >> Knock Sensor >> Removal

Knock Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect battery ground cable from battery ground terminal.
    Fig 1: Disconnecting Battery Ground Cable From Battery Ground Terminal
    G02877122Courtesy of SUBARU OF AMERICA, INC.
  2. Remove intake manifold.

    < Ref. to REMOVAL , Intake Manifold.>

  3. Disconnect knock sensor connector.
  4. Remove knock sensor from cylinder block.
    Fig 2: Removing Knock Sensor From Cylinder Block
    G02877123Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals