LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Outback Base, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection (Fuel Systems, H6DO)) >> Intake Manifold Pressure Sensor >> Removal

Intake Manifold Pressure Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02877129Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect connector from intake manifold pressure sensor.
  3. Remove intake manifold pressure sensor from throttle body.
    Fig 2: Removing Intake Manifold Pressure Sensor From Throttle Body
    G02877130Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals