Crankshaft Position Sensor: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

Tightening torque: 6.4 N.m (0.65 kgf-m, 4.7ft-lb)

Fig 1: Installing Crankshaft Position Sensor
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 5.0 N.m (0.51 kgf-m, 3.7 ft-lb)

Fig 2: Installing Engine Harness Bracket To Intake Manifold
Courtesy of SUBARU OF AMERICA, INC.