LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Outback Base, 4D Wagon, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the << YES >> key.
  2. On the << System Select Menu >> display screen, select {Brake System} and press the << YES >> key.
  3. Press the << YES >> key after displayed the information of ABS type.
  4. On the << Brake Control Diagnosis >> display screen, select the {Clear Memory} and press the << YES >> key.
    CLEAR MEMORY MODE CHART

    Display screen Contents to be monitored
    Clear memory? Function of clearing trouble code.
  5. When the "Done" and "turn ignition switch OFF" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
scientia non olet · About LEMON Manuals