Transfer Clutch Pressure Test: Inspection: Evaluation

MPT model

NOTE: If oil pressure is not produced or if it does not change in the AWD mode, the transfer duty solenoid or transfer valve assembly may be malfunctioning. If oil pressure is produced in the FWD mode, the problem is similar to that in the AWD mode.

STANDARD TRANSFER CLUTCH PRESSURE kPa (kg/cm² , psi) (MPT MODEL)

ON Duty ratio (%)	Throttle position	AWD mode	FWD mode
5	Full open	932-1,089 (9.5-11.1, 135-158)	-
60	2/3 throttle	216-294 (2.2-3.0, 31-43)	-
95	Full closed	-	0 (0, 0)

VTD model

STANDARD TRANSFER CLUTCH PRESSURE kPa (kg/cm² , psi) (VTD MODEL)

Duty ratio (%)	Throttle opening angle	Standard of transfer clutch pressure kPa (kg/cm² , psi)
95	Fully open	932-1,089 (9.5-11.1, 135-158)
60	2/3 open	216-294 (2.2-3.0, 31-43)